PCB designs
From wikipost
(Redirected from Pending PCB manufacturing)
Jump to navigationJump to search
Current (and old) PCB related projects:
| Project | Description | Schematic Design | PCB Design | Gerbers | Comments |
| mcu_0050-handheld-tempsensor | Handheld Tempsensor | finished | finished | finished | Gerbers: File:0050-gerbers-v1.0.zip |
| mcu_0051-lcd-i2c-board | I2C LCD Board | finished | finished | finished | Gerbers: File:0051-gerbers.zip |
| mcu_0053-AVR-Fuse-Resetter | AVR Fuse Resetter | 90% | 70% | incomplete | x1 join nets in schematic, use ZIF socket if possible, use ic sockets in pcb |
| mcu_0055-rs232-tempsensor | RS232 temp sensor add-on board | finished | finished | finished | Gerbers: File:0055-gerbers-v1.0.zip |
| mcu_0056-nokia-48x84-i2c-board | small display board | incomplete | incomplete | incomplete | not started yet |
| mcu_0057-lcd-i2c-eval-board | LCD Development Board with I2C | 40% | 40% | incomplete | check I2C lines, design headers, add texts |
| . | RC Autopilot | incomplete | incomplete | incomplete | core developed on Arduino Pro Mini, base board design exists only in breadboard |
| mcu_0058-ATtiny85-eval-board | small ATtiny85 eval board | incomplete | incomplete | incomplete | small eval board with work area, power regulator, DC socket, a switch and a LED |
| mcu_0059-ATtiny84-eval-board | small ATtiny84 eval board | 90% | 80% | incomplete | small eval board with work area, power regulator, DC socket, a switch and a LED |
| mcu_0060-Voltage-data-logger | Voltage data logger | incomplete | incomplete | incomplete | depends on wireless transmission (ir or xbee) and micro sdcard storage |
| mcu_0061-heart-rate-monitor | Heart rate monitor | incomplete | incomplete | incomplete | need to get hardware to work on test board first |
| Mcu 0062-LCD-48x84-RC-Enclosure-top-pcb | 48x84 Nokia LCD board | finished | finished | finished | Gerbers: File:0062-gerbers-v1.0.zip |
| 0124-433 | PCB Dipole antenna for 433MHz | finished | finished | finished | Gerbers: File:0124-433 v1.0.zip |
| 0124-868 | PCB Dipole antenna for 868MHz | finished | finished | finished | Gerbers: File:0124-868 v1.0.zip |
| 0124-915 | PCB Dipole antenna for 915MHz | finished | finished | finished | Gerbers: File:0124-915 v1.0.zip |
My first order was placed with BatchPCB. For me, this is a convenient and cheap way to obtain professional pcb's in low quantities. Feel free to drop me a line on alternative pcb manufacturers that can also do low-cost and low-quantity pcb's.
