Difference between revisions of "Aprs"
Latest revision as of 10:45, 8 April 2015
Automatic Packet Reporting System (APRS) is an amateur radio-based system for real time tactical digital communications of information of immediate value in the local area. In addition, all such data is ingested into the APRS Internet System (APRS-IS) and distributed globally for ubiquitous and immediate access. -- Wikipedia
These pages have been created in maintaining some level of order in the process of getting involved in APRS.
- Aprs-on-rpi Detailed blog on setting up a Fill-in Digi on a Raspberry Pi
- APRS Hardware and electronics (Sound cards, TNC's, VOX, RTC, PTT circuits)
The following entries have been created for APRS on Linux:
- ACP APRS Configuration Panel
- aprs-soundmodem aprs - USB sound card - soundmodem - aprx
A list of setups that have been successfully configured to run APRS on a Raspberry Pi
|RPi Model||TNC Method||Radio||Usage||Comments|
|A (Rev2)||USB Sound Card||Icom IC-P2AT||Fill-in Digi||uses GPIO pin on the RPi to trigger PTT|
|A (Rev2)||USB Sound Card||Baofeng UV-5R||Rx-Only iGate||uses GPIO pin on the RPi to trigger PTT|
|B Rev2||TNC-Pi||Icom IC-207H||Fill-in Digi and iGate||needed pre/de-emphasis filters|
|B Rev2||TNC-Pi||Kenwood TM-211A||Rx-Only iGate|
|B+||TNC-Pi||Yaesu FT-1802M||Rx-Only iGate|