Rpi-aprs-cmdline.txt: Difference between revisions
Jump to navigation
Jump to search
(Created page with "<pre> /boot/cmdline.txt </pre> The file cmdline.txt in the /boot directory can configure additional TTY's. In case the serial port of the TNC-Pi board is used it is a require...") |
(No difference)
|
Latest revision as of 10:14, 8 November 2014
/boot/cmdline.txt
The file cmdline.txt in the /boot directory can configure additional TTY's. In case the serial port of the TNC-Pi board is used it is a requirement to remove some of the tty settings in this file.
The original Raspberry Pi /boot/cmdline.txt file contains a single line with the following arguments:
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
To use the TNC-Pi board, take out the following two arguments:
- console=ttyAMA0,115200
- kgdboc=ttyAMA0,115200
New config line:
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait