Rpi-aprs-aprx.conf

From wikipost
Revision as of 11:00, 8 November 2014 by Admin (talk | contribs) (Created page with "<pre> /etc/aprx.conf </pre> Aprx is a Linux based APRS client with full digipeater capabilities. The config below is for a Receive-(to APRSIS)-only iGate can can be tweaked ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
/etc/aprx.conf

Aprx is a Linux based APRS client with full digipeater capabilities.

The config below is for a Receive-(to APRSIS)-only iGate can can be tweaked for full digipeater capabilities. Read the extensive manual for aprx for full details.

# -- global variables --
mycall  VK2HAQ-1
myloc lat 3256.14S lon 15137.75E

# -- APRS Internet System --
# use appropriate passcode for your station
<aprsis>
passcode -1
server   aunz.aprs2.net
</aprsis>

# -- program and packets logging --
<logging>
pidfile /var/run/aprx.pid
rflog /dev/shm/aprx-rf.log
aprxlog /dev/shm/aprx.log
dprslog /var/log/aprx/dprs.log
</logging>

# -- interfaces --
<interface>
   ax25-device   $mycall
   tx-ok         false  # transmitter enable defaults to false
</interface>

# -- beacon --
<beacon>
beaconmode aprsis
cycle-size 20m
beacon symbol "R&" $myloc comment "Rx-only iGate"
</beacon>