https://www.marcelpost.com/wiki/index.php?action=history&feed=atom&title=Yaesu_FT-1802MYaesu FT-1802M - Revision history2026-06-11T14:01:23ZRevision history for this page on the wikiMediaWiki 1.39.17https://www.marcelpost.com/wiki/index.php?title=Yaesu_FT-1802M&diff=1874&oldid=prevAdmin at 00:33, 14 January 20152015-01-14T00:33:45Z<p></p>
<p><b>New page</b></p><div>The Yaesu FT-1802M<br />
<br />
[[File:Yaesu-FT-1802M.jpg]]<br />
<br />
<br />
We used this radio to set up a Receive-only iGate running on a Raspberry Pi model B+ using the TNC-Pi and a Yaesu FT1802M radio.<br />
<br />
Fortunately the radio was presented to me with a pre-made TNC cable. Even though this cable was made for the Argent Data OpenTracker with a GPS module, it turned out that the connections are exactly the same for interfacing to the TNC-Pi.<br />
<br />
[[File:1802M-pinout.jpg|none|RJ-12 microphone socket pinout]]<br />
<br />
[[File:TM-1802M TNC-cable.jpg|thumb|none|400px]]<br />
<br />
You may notice the additional Anderson connector. This is not required for the TNC-Pi but for powering the OpenTracker/GPS modules as it was used in its original configuration.<br />
<br />
<br />
The output volume on the SPK port at the back of the radio is not fixed and needs to be adjusted using the front volume knob.<br />
<br />
<br />
[[File:TNC-Pi TM-1802M.jpg|thumb|none|400px|working iGate setup]]</div>Admin