Mcu 0139-remote-433MHz-transmitter: Difference between revisions

From wikipost
Jump to navigation Jump to search
No edit summary
No edit summary
(One intermediate revision by the same user not shown)
Line 35: Line 35:


[[File:0139 PCB v1.3 schematic.png]]
[[File:0139 PCB v1.3 schematic.png]]


Gerbers: [[File:0139-remote-sensors-433Mhz v1.4 gerbers.zip]]

Source code: [[File:0139 remote 433MHz transmitter v0.5.ino.zip]]






<pre>
<pre>
0139 433mhz transmitter bill of materials (PCB v1.3)
0139 433mhz transmitter bill of materials -- PCB v1.4


R1 1206 20k
R1 1206 20k
Line 46: Line 51:
R4 1206 10k
R4 1206 10k
R5 1206 10k
R5 1206 10k
R6 1206 10R
R6 1206 4k7
R7 1206 4k7


C1 1206 1uF
C1 1206 1uF
Line 54: Line 58:
C4 1206 1uF
C4 1206 1uF


U1 SOIC ATTiny85
U1 SOIC ATTiny85
U2 TO-92 DS18B20
U2 TO-92 DS18B20
U3 SOT23-5 NCP718
U3 TSOT23-5 NCP718ASN330T1G
U4 11x11mm H34A module


T1 SOT23 (N-Ch FET) BSS138 or Si2302DS
T1 SOT23 (N-Ch FET) BSS138 or Si2302DS

Revision as of 03:23, 1 January 2022

Home automation project sending telemetry using a low-cost ISM-band (433MHz) transmitter.


This is a change of plan from what I originally intended to use (the RFM69HW modules), but with several home automation solutions easily available I decided to make use of these modules instead.


This is the bare transmitter module.

H34A-module.jpg



Here is the transmitter module wrapped in heatshrink and stuck on top of an Arduino Nano

0139 Prototype-1 Arduino-nano.jpg


Making the overall form factor even smaller by contemplating putting it on a Digispark board.

0139 Prototype-2 Digispark ATtiny85.jpg

The benefit is that the ATtiny85 modules are fairly cheap and can hold up to 8kB of program memory. A quarter the size of the ATMega328 Arduino but probably still more than enough to send some telemetry.


This is the module fitted onto a custom PCB that has the ATtiny85 on the underside.

0139 Prototype-3 Attiny V1.0.jpg


Schematic:

0139 PCB v1.3 schematic.png


Gerbers: File:0139-remote-sensors-433Mhz v1.4 gerbers.zip

Source code: File:0139 remote 433MHz transmitter v0.5.ino.zip


0139 433mhz transmitter bill of materials -- PCB v1.4

R1  1206  20k
R2  1206  4k7
R3  1206  1k
R4  1206  10k
R5  1206  10k
R6  1206  4k7

C1  1206  1uF
C2  1206  1uF
C3  1206  1uF
C4  1206  1uF

U1  SOIC      ATTiny85
U2  TO-92     DS18B20 
U3  TSOT23-5  NCP718ASN330T1G

T1  SOT23  (N-Ch FET) BSS138 or Si2302DS
T2  SOT23  (P-Ch FET) NDS352AP or BSH203
T3  SOT23  (P-Ch FET) NDS352AP or BSH203

D1  1206   LED