I2c-slave

From wikipost
Revision as of 11:05, 16 March 2014 by Admin (talk | contribs) (Created page with "These code snippets and functions are intended for an I2C slave device. Functions: * listen on a set I2C device ID and issue an acknowledge bit when addressed * read incomin...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

These code snippets and functions are intended for an I2C slave device.

Functions:

  • listen on a set I2C device ID and issue an acknowledge bit when addressed
  • read incoming bytes when addressed (i.e. master sends the slave a 'write')
  • detect incoming read requests (i.e. when master sends us the write/read/address sequence)
  • reply back to read requests (i.e. master sets the clock, slave sets SDA)


(code available, just not yet copied here)