https://www.marcelpost.com/wiki/index.php?action=history&feed=atom&title=Rpi-aprs-aprx.confRpi-aprs-aprx.conf - Revision history2026-05-17T04:59:01ZRevision history for this page on the wikiMediaWiki 1.39.17https://www.marcelpost.com/wiki/index.php?title=Rpi-aprs-aprx.conf&diff=1705&oldid=prevAdmin: Created page with "<pre> /etc/aprx.conf </pre> Aprx is a Linux based APRS client with full digipeater capabilities. The config below is for a Receive-(to APRSIS)-only iGate can can be tweaked ..."2014-11-08T11:00:17Z<p>Created page with "<pre> /etc/aprx.conf </pre> Aprx is a Linux based APRS client with full digipeater capabilities. The config below is for a Receive-(to APRSIS)-only iGate can can be tweaked ..."</p>
<p><b>New page</b></p><div><pre><br />
/etc/aprx.conf<br />
</pre><br />
<br />
Aprx is a Linux based APRS client with full digipeater capabilities.<br />
<br />
The config below is for a Receive-(to APRSIS)-only iGate can can be tweaked for full digipeater capabilities. Read the extensive manual for aprx for full details.<br />
<br />
<pre><br />
# -- global variables --<br />
mycall VK2HAQ-1<br />
myloc lat 3256.14S lon 15137.75E<br />
<br />
# -- APRS Internet System --<br />
# use appropriate passcode for your station<br />
<aprsis><br />
passcode -1<br />
server aunz.aprs2.net<br />
</aprsis><br />
<br />
# -- program and packets logging --<br />
<logging><br />
pidfile /var/run/aprx.pid<br />
rflog /dev/shm/aprx-rf.log<br />
aprxlog /dev/shm/aprx.log<br />
dprslog /var/log/aprx/dprs.log<br />
</logging><br />
<br />
# -- interfaces --<br />
<interface><br />
ax25-device $mycall<br />
tx-ok false # transmitter enable defaults to false<br />
</interface><br />
<br />
# -- beacon --<br />
<beacon><br />
beaconmode aprsis<br />
cycle-size 20m<br />
beacon symbol "R&" $myloc comment "Rx-only iGate"<br />
</beacon><br />
</pre></div>Admin